tmp/apcupsd.pid - note 1: The original (2004) apcupsd was in /sbin. share/MD0_DATA/.qpkg/Optware/sbin/apcupsd. share/MD0_DATA/.qpkg/Optware/share/hal/fdi/policy/20thirdparty/80-apcupsd-ups-policy.fdi. share/MD0_DATA/.qpkg/Optware/share/man/man8/apcupsd.8.
share/MD0_DATA/.qpkg/Optware/lib/ipkg/info/apcupsd.list. share/MD0_DATA/.qpkg/Optware/lib/ipkg/info/nffiles. share/MD0_DATA/.qpkg/Optware/lib/ipkg/info/ntrol. share/MD0_DATA/.qpkg/Optware/etc/apcupsd/nf. share/MD0_DATA/.qpkg/Optware/etc/apcupsd/offbattery. share/MD0_DATA/.qpkg/Optware/etc/apcupsd/commok. share/MD0_DATA/.qpkg/Optware/etc/apcupsd/changeme. share/MD0_DATA/.qpkg/Optware/etc/apcupsd/commfailure. share/MD0_DATA/.qpkg/Optware/etc/apcupsd/apccontrol. share/MD0_DATA/.qpkg/Optware/etc/apcupsd/onbattery. share/MD0_DATA/.qpkg/Optware/etc/apcupsd. Downloading Configuring apcupsd Successfully terminated.
#XOFFBATT MULTIMON INSTALL#
Also, /opt is a symbolic link to the NAS volume: '# ls -alF /opt' gives: lrwxrwxrwx 1 admin administ 29 Jan 19 19:39 /opt -> /share/MD0_DATA/.qpkg/Optware/ 9 ) type 'ipkg help' to see what you can do with ipkg 10 ) type 'ipkg update' to download a current list of what is currently available:Ĭode: Select all # ipkg install apcupsd Installing apcupsd (3.14.5-2) to root. 8 ) PuTTY into the NAS as admin you'll find that ipkg is in the path and has been installed in. 5 ) in web admin APPLICATIONS > QPKG plugins click on INSTALLATION tab 6 ) as instructed there, browse to the location where the unzipped file is, and then click 7 ) after installation is complete, time to shift to console mode. 4 ) unzip the downloaded file on your PC. 2 ) new window opens, click on 'Optware IPKG (Itsy Package Management System)' 3 ) at bottom of package, select correct link for your architecture (for me: Intel x86 ) and save the file to some location on your PC. 1 ) Log onto NAS web interface as admin and navigate to APPLICATIONS > QPKG plugins, click on installation tab. As I still haven't found a step-by-step guide to this, here's what I did. So following Don's lead, I decided to give it a try, and it didn't fail. Well, I decided I might as well have to do a complete reset now rather than after there is lots of data on the NAS if the experiment to install apcupsd through ipkg fails. Clearly not everyone here has had as nice an experience, but don't give up on apcupsd before trying it. Though I would like all the bug fixes and info enhancements that would come with a current version of apcupsd on the QNAP, things turned out much better than I had expected.
#XOFFBATT MULTIMON HOW TO#
If I can figure out how to do this automatically (haven't researched yet) then this will have turned out to be much simpler than I thought it would be.
So, all I've had to do on the QNAP is manually fire up apcupsd after a reboot.
#XOFFBATT MULTIMON PC#
I then configured apcupsd (3.14.8) on the PC to watch the QNAP and that worked too (though infomation is not quite as complete as when I hooked the UPS up to my PC and ran the current version of apcupd there for comparison). To my unexpected delight, '/sbin/apcaccess status' showed correct info. So, I disabled UPS management in the web admin pages (don't want two independent methods trying to run the show) and fired up apcupsd. Initially I used the web admin pages on the QNAP to configure the UPS, and this worked (config accepted, status shown, but not tested), but after doing this and looking at running processes I noticed the apcupsd daemon was missing. Both gracefully shut down with UPS battery to spare when I pull the UPS plug. My UPS sends the info to the QNAP which relays it over the network to my PC. Code: Select all edit (additional info) - # apcupsd & no modification of nf required -end edit To my surprise, it worked flawlessly.
0 kommentar(er)
